The AVT-EMCUSB-Conv USB converter is a variable, easy-to-connect device with small dimensions that electrically decouples devices with USB ports during testing and supplies them with power. The data transmission is done optically with a kevlar reinforced highly flexible fiber optic cable. The connection to PCs/laptops is made with a USB 3 connector (design A). The connectable devices can be USB3.0 or USB 1.0 to 2.0. The electromagnetic emissions of the USB converter AVT-EMCUSB-Conv are in the low range, with maximum resistance without functional restrictions at field strengths above 100 V/m (standard) or up to over 400 V/m (depending on the selected option).

Power LED lamp for EMC and test laboratories, as well as general applications with lowest interference with the following characteristics:

• rated power 75 W
• high luminous flux up to 10 000 lm
• high color rendering index (CRI/Ra) 90 to 97
• low heat generation
• selectable light color (2700 K to 6000 K)
• selectable aperture angle (15° to 80°) of reflectors
• slim design
• with AVT driver lowest emissions (noise level)

LWIR Thermography camera especially for EMC and test laboratories, as well as general applications with the following features:

- different resolutions
- selectable focal length
- selectable frame rate
- wide thermal wavelength range
- wide temperature range
- data transmission with optical fibers
- compact housing in slim design
- high noise immunity > 100 V/m

High resolution (UHD = 4K) Camera especially for EMC- und test laboratories, and general applications with following features:
- different resolutions selectable (640 x 360 up to 3840 x 2160)
- Pan/Tilt/Zoom inside camera controled by software
- selectable frame rate (up to 60 fps)
- high quality Sony sensor (IMX317)
- USB Video Class (UVC) compliant
- data transmission with optical fibers (USB 3.0)
- small housing in slim design
- high field immunity > 100 V/m

The AVT-EMCUSB-Conv USB converter is a variable, easy-to-connect device with small dimensions that electrically decouples devices with USB ports during testing and supplies them with power. The data transmission is done optically with a kevlar reinforced highly flexible fiber optic cable. The connection to PCs/laptops is made with a USB 3 connector (design A). The connectable devices can be USB3.0 or USB 1.0 to 2.0. The electromagnetic emissions of the USB converter AVT-EMCUSB-Conv are in the low range, with maximum resistance without functional restrictions at field strengths above 100 V/m (standard) or up to over 400 V/m (depending on the selected option).

Power LED lamp for EMC and test laboratories, as well as general applications with lowest interference with the following characteristics:

• rated power 75 W
• high luminous flux up to 10 000 lm
• high color rendering index (CRI/Ra) 90 to 97
• low heat generation
• selectable light color (2700 K to 6000 K)
• selectable aperture angle (15° to 80°) of reflectors
• slim design
• with AVT driver lowest emissions (noise level)

LWIR Thermography camera especially for EMC and test laboratories, as well as general applications with the following features:

- different resolutions
- selectable focal length
- selectable frame rate
- wide thermal wavelength range
- wide temperature range
- data transmission with optical fibers
- compact housing in slim design
- high noise immunity > 100 V/m