MIL-MG3 is tailored to CS106, CS115 and CS116 test requirements. This latest system has been enhanced by the addition of modules for CS06 testing and user specific frequency modules for CS116. The plug-in modular design gives users the flexibility of adding modules to perform DO-160 section 17 and section 19 testing, as well as MIL-STD-1275 all from the same MIG-MG3 mainframe. A single coupler enables calibration and testing to CS115 and CS116 without disturbing the test setup making the process faster and more efficient. Ease of use, predefined test routines and a single universal coupler make MIL-MG3 the most efficient and technically advanced instrument available today. Complimented by the TEMA3000 software, MIL-MG3 is simply the best all round test system for engineers in a hurry.

A flexible solution that includes:

· MIL-STD-461C CS06 spikes, power leads

· MIL-STD-461 CS106 transients, power leads

· MIL-STD-461 CS115 bulk cable injection

· MIL-STD-461 CS116 damped sinusoidal transients

· MIL-STD-1275 Imported spikes

· DO-160 section 17 Voltage spikes

· DO-160 section 19 Inductive switching transients

1.1.1 MIL-MG3 Series – Product Videos

· MIL-MG3 – Short Product Insight
https://www.youtube.com/watch?v=rfYVkeysR0o

· MIL-STD-461 test equipment overview

https://www.youtube.com/watch?v=O-_jBD7K-IQ

Testing EV Charging Stations :
Reliable EMC test systems for conducted transient testing up to 1500VDC and 200A

The increasing demand for electric and hybrid vehicles requires the expansion of a charging network. These charging stations, whether AC or DC, must comply with EMC requirements of international standards such as IEC 61851-21-1 and IEC 61851-21-2. The tests include ESD, EFT/Burst, surge, and voltage dips.

With the drive to reduce dependency on fossil fuels, electric and hybrid vehicles are becoming more popular. To support this trend, a network of EV charging stations has to be established. Because these are connected to the normal power grid, they are subjected to testing rules following the International Electro technical Committee (IEC), which includes EFT/Burst, surge and dips testing. The charging stations have AC inputs and DC outputs, which both must be tested.

EMC PARTNER test solutions, specialized Coupling Decoupling Networks (CDN) and accessories help the operator to easily perform these tests with high reliability and flexibility.

Applications:

• On-Board-Charging
• Off-Board-Charging
• Wireless Power Transfer Charging

Test Types:

• EFT Transients as per IEC 61000-4-4
• CWG Impulses as per IEC 61000-4-5
• AC Dips and Variations as per IEC 61000-4-11 and IEC 61000-4-34
• Magnet Fields as per IEC 61000-4-8
• ESD as per IEC 61000-4-2 and ISO 10605
• 1.2/50μs Insulation Test as per IEC 60664-1

ELECTRICITY METERS

Smart Grids use information and communication technologies to create integrated data and electricity networks with intelligent functionalities. Key components include smart meters, measuring relays, protection devices in substations, charging stations, and solar power plants. To ensure proper operation, Smart Grids must undergo EMC and insulation tests according to standards like IEC 62052-11 or IEC 60255-26. EMC PARTNER provides comprehensive testing solutions for all conducted transient and insulation tests in compliance with international IEC standards.

Energy costs are increasing worldwide providing an impetus to greater energy efficiency. For users to benefit from this increased efficiency, an accurate and reliable measurement of consumed energy is necessary. The mechanical electricity meter is being replaced by electronic smart electricity meters with remote load monitoring. Because energy meters are installed in the power distribution network, they are subjected to high voltage insulation and damped oscillatory wave (DOW) testing.

TEST TYPES:

• 1.2/50µs Voltage Insulation
• EFT/Burst Impulse
• 1 MHz Damped Oscillatory Wave
• Combination Wave Impulses

Reliable high quality solution for indirect lightning testing. Ready for future demands

EMC PARTNER AG, expert in test generators according to DO-160, presents AVI-LV5 – the reliable test system for indirect lightning testing. Now in its third generation with revolutionary solid-state technology, it offers all test levels for DO-160 Section 22 and also meets MIL-STD-461 : CS117 requirements. Successfully support the future of air mobility for over 20 years.