RadiField® Electric Field Generator

RadiSense® Electric Field Probes from Raditeq set the benchmark for precision, speed and reliability in EMC and reverberation testing. Designed with cutting-edge technology, these probes offer unparalleled accuracy and stability, making them the ideal choice for a wide range of applications.

Featuring fiber optic connections, RadiSense® probes eliminate interference and ensure reliable measurements, even in challenging testing environments. With their lightweight and compact design, these probes are easy to handle and integrate seamlessly into your existing test setups.

RadiSense® probes are compatible with various EMC and reverberation test systems and adhere to international standards, ensuring reliable performance across diverse applications. Whether you're conducting immunity testing or emissions measurements, RadiSense® delivers precise and dependable results every time.

Discover how RadiSense® can enhance your EMC and reverberation testing processes by visiting our stand!

RadiPower® RF Power Meters from Raditeq deliver unmatched accuracy and efficiency for RF power measurement tasks. Designed to meet the demands of modern EMC and RF testing, these devices ensure reliable and repeatable results across a wide frequency range.

Equipped with advanced technology, RadiPower® meters feature fast measurement speeds and high sensitivity, making them suitable for a variety of applications. Whether in EMC labs or RF testing environments, these power meters provide exceptional performance for both conducted and radiated power measurements.

RadiPower® is compact, easy to integrate, and supports a variety of test setups. With its seamless connection to RadiMation® EMC software, RadiPower® offers a fully automated testing experience, increasing productivity and accuracy.

RadiLink® by Raditeq is an advanced RF Optical Link system designed to ensure accurate and interference-free signal transmission during EMC testing. This cutting-edge solution converts RF signals into optical signals, enabling lossless transmission over long distances without the risk of electromagnetic interference.

Perfect for use in shielded environments, RadiLink® is ideal for applications requiring remote signal monitoring or testing in challenging conditions. With its high dynamic range and wide frequency coverage, it supports a broad spectrum of EMC and RF testing requirements.

RadiLink® is compact, easy to install, and fully compatible with other Raditeq solutions, ensuring seamless integration into your existing test setups. This system enhances testing efficiency while maintaining the precision and reliability that Raditeq is known for.

RadiSense® Precision E-Field Measurement

The RadiSense® series by Raditeq offers high-accuracy E-field probes for use in anechoic, GTEM, and reverberation chambers. Designed for reliability and accuracy, RadiSense® combines compact design, laser-powered operation, and superior EMC and RF testing performance.

With excellent isotropy and built-in correction data, each probe ensures precise, repeatable field measurements across a wide frequency range. Its laser-powered, battery-free design eliminates interference and maintenance issues.

Optimized for both standard EMC testing and reverberation chamber measurements, RadiSense® delivers fast, accurate, and consistent results, making it the preferred choice for professional EMC/RF engineers worldwide.

RadiMation® is automated EMC test software designed for engineers working in emission and immunity testing. It supports testing across all international EMC standards and works with equipment from any brand. It comes in three versions: Free (basic view/control), Essential (pre-certification tests) and Pro (full compliance tests).

The software emphasizes flexibility, full automation, traceable results, and report generation, making it suitable for laboratories, automotive, telecom, defense and other industries.

Key features include:

• Multi-brand device support (over 6,000 device drivers)

• Modular architecture (modules for radiated emission/immunity, conducted emission/immunity, report generator)

• Automated test sequences, data export, and site license options.

The RadiPower® series are USB-controllable RF/EMC power meters designed for high accuracy, speed and flexibility. They support wide frequency ranges (from kHz up to ~18 GHz depending on model) and offer measurement modes including CW, RMS, peak, burst/envelope tracing, pulsed, AM/FM.

Key features:

• Easy PC/USB connection and integration into test setups.

• High dynamic range (e.g., > 65 dB for some models) and precision (±0.15-0.2 dB in many cases) suitable for EMC immunity and power measurement.

• Specific models support ultra-fast measurement speeds (up to tens of mega-samples per second) and have trigger inputs/outputs for synchronised multi-port/MIMO scenarios.

• Compatible in both standalone PC setups or integrated via plug-in cards for forward and reflected power measurements in modular systems.

The RadiField® series offers advanced electric field generators designed for radiated-immunity testing (EMC). The key innovation: the instruments combine amplifiers, antennae, directional couplers and power meters into one compact unit — eliminating many of the efficiency losses found in conventional systems.

Highlights:

• Integrated architecture: antenna arrays plus integrated amplifiers remove the need for separate combiners and long coaxial runs.

• High efficiency: The design reduces power loss, lowers calibration/maintenance costs and enables higher field strengths.

• Broad frequency coverage & high field levels: e.g., models cover 800 MHz–6 GHz and 6–18 GHz with test levels up to ~54 V/m or ~75 V/m at specified distances.

• Easy system integration: A single coaxial cable carries RF, power and control signals, simplifying setup.

• Designed for EMC standards compliance: Suitable for radiated immunity testing per standards like IEC 61000‑4‑3 and more.

The RadiGen® series is a range of RF signal generators developed specifically for EMC and RF immunity testing. They produce carrier signals (CW) and support modulation types such as AM, FM, and pulse/gated pulse, with very fast switching times and high accuracy. Available models cover frequency ranges from approximately 9 kHz up to 6 GHz, making them suitable for both conducted and radiated immunity tests. The modules are compact plug-in cards designed for use in the modular RadiCentre® system.

Key features:

• Wide frequency coverage (e.g. 9 kHz–400 MHz, 4 kHz–6 GHz)

• Built-in AM/FM/pulse modulator, including automotive radar gated-pulse capability

• Typical frequency error below 1 ppm and output level settling times under 1 ms

• Easy integration into EMC setups with modular design and automated software control

RadiMation® is full compliant EMC automation software specifically designed to meet the needs of EMC engineers. With its user-friendly design and flexibility, it provides a comprehensive testing solution that is compatible with all equipment and brands.

The software stands out for its powerful EMC test suite, which strictly adheres to international EMC standards. Additionally, RadiMation® meets a wide range of industry-specific requirements, ensuring your tests are both accurate and compliant with the latest regulations.

A key feature of RadiMation® is its modular structure. Separate modules are available for different functions, allowing users to tailor the software to their specific testing needs. Whether it’s conducted immunity, radiated emissions, or other EMC measurements, RadiMation® provides the right tools to handle every task efficiently and reliably.

The software is designed to simplify the work of EMC engineers and optimize test results. Thanks to its compatibility with all brands and devices, users can seamlessly integrate their existing testing systems into RadiMation® without the need for additional investments in new hardware.

If you are looking for a reliable, flexible, and easy-to-use software solution for your EMC testing, RadiMation® is the perfect choice. Learn more about the features and benefits of RadiMation® on the official product page.

RadiMation® – The trusted choice for precise and full compliant EMC testing.

RadiSense® Electric Field Probes from Raditeq set the benchmark for precision, speed and reliability in EMC and reverberation testing. Designed with cutting-edge technology, these probes offer unparalleled accuracy and stability, making them the ideal choice for a wide range of applications.

Featuring fiber optic connections, RadiSense® probes eliminate interference and ensure reliable measurements, even in challenging testing environments. With their lightweight and compact design, these probes are easy to handle and integrate seamlessly into your existing test setups.

RadiSense® probes are compatible with various EMC and reverberation test systems and adhere to international standards, ensuring reliable performance across diverse applications. Whether you're conducting immunity testing or emissions measurements, RadiSense® delivers precise and dependable results every time.

Discover how RadiSense® can enhance your EMC and reverberation testing processes by visiting our stand!

RadiPower® RF Power Meters from Raditeq deliver unmatched accuracy and efficiency for RF power measurement tasks. Designed to meet the demands of modern EMC and RF testing, these devices ensure reliable and repeatable results across a wide frequency range.

Equipped with advanced technology, RadiPower® meters feature fast measurement speeds and high sensitivity, making them suitable for a variety of applications. Whether in EMC labs or RF testing environments, these power meters provide exceptional performance for both conducted and radiated power measurements.

RadiPower® is compact, easy to integrate, and supports a variety of test setups. With its seamless connection to RadiMation® EMC software, RadiPower® offers a fully automated testing experience, increasing productivity and accuracy.

RadiLink® by Raditeq is an advanced RF Optical Link system designed to ensure accurate and interference-free signal transmission during EMC testing. This cutting-edge solution converts RF signals into optical signals, enabling lossless transmission over long distances without the risk of electromagnetic interference.

Perfect for use in shielded environments, RadiLink® is ideal for applications requiring remote signal monitoring or testing in challenging conditions. With its high dynamic range and wide frequency coverage, it supports a broad spectrum of EMC and RF testing requirements.

RadiLink® is compact, easy to install, and fully compatible with other Raditeq solutions, ensuring seamless integration into your existing test setups. This system enhances testing efficiency while maintaining the precision and reliability that Raditeq is known for.